¿Cómo programo la apertura de puerta de garaje universal de mi Lincoln?

Lincoln offers two different systems to open your garage door conveniently from your vehicle's visor. Programming instructions vary based on your vehicle's opener and your garage door system. See below for more information.

Identifying Your Lincoln Garage Door Opener

Use the following table to determine which transmitter your vehicle is equipped with.

Transmitter Type

Descripción 

Imagen 

Car2U®The transmitter has three buttons with a light above each button. 
Car2U Transmitter displayed.
HomeLink®

The transmitter has three buttons with a house-shaped icon with one light.

The three transmitter buttons may be on the bottom of your vehicle's rearview mirror.

HomeLink Transmitter displayed.
HomeLink Transmitter alternative version displayed on rearview mirror.

Programming Your Garage Door Opener

Select your vehicle's transmitter from the drop-down options below to learn how to program it.

HomeLink

Select the appropriate video below based on your garage door opening system to view instructions on programming your HomeLink transmitter.  

Programar HomeLink con la mayoría de los sistemas de apertura de puerta de garaje


Programar HomeLink con los sistemas de apertura de puerta de garaje Genie Intellicode 2


Programar HomeLink con los sistemas de apertura de puerta de garaje Genie Intellicode

For questions, please visit the HomeLink website or call 1-800-355-3515.

Car2U

Car2U garage door openers have specific programming instructions depending on whether your garage door system uses a rolling or fixed code system. A rolling code means your system generates a new security code every time the remote control is used to open your garage, whereas a fixed code always uses the same code. 

To determine which type of system you have, open the cover of your garage opener located on the back or side of the unit. If you see a circuit board, you have a rolling code system. You have a fixed code system if you see a series of small switches. 

To view instructions on how to program your unit, select the appropriate video below.  

Transmisor de código variable 


Transmisor de código fijo     

For additional programming information, consult your Owner's Manual under the "Universal Garage Door Opener" section.


Gentex®, HomeLink®, and the HomeLink® house icon are registered trademarks of Gentex Corporation.